DOMESTIC VERTICAL MODEL
|I brought these castings (
Castings from Bob Herder) back with me after the USA trip
I didnt quite go for the water cooling so I put fins on the cylinder and made my own design carb
and fuel tank. It made for a slightly different Domestic but, who is to say it isnt a model of a
It runs well but I have to slow it down a little when it is bedded in. There are a few errors on the
plans so anyone building one should double check before making that cut!
click on images for larger view
Above are two general views of the model.
|Left, shows the new carb and fuel tank which is different to the original plans.|
|Picture at left shows terminals for
battery in the base.
|Left, the completed model at it's first outing.|