12" Williams Stone Burr Grist Mill Restoration in Progress by John Bailey, Lake Charles, Louisiana Page three..... .....Click on small picture to enlarge..... Frames Viewer for much faster viewing. ....Setting the Bedstone.... (1)     (2)     (3)     (4)     (1,2) First of all I stood the mill up vertically, runner stone in place. (3) I covered the runner stone with waxed paper and placed the bedstone squarely on top of it. (4) I cut a shim from 1/4" plywood to go between the two enclosure halves. (1)     (2)     (3)     (4)     (1,2,3) I then clamped the bedstone enclosure half in place. (4) I used a plastic funnel as a form for the feeder hole. (1)     (2)     (3)     (4)     (1) Here I am pouring the concrete. (2) Letting is set up. (3) Cast in stone. (4) Bedstone half is complete. (1)     (2)     (3)     (4)     (1) The spout. (2,3) Mill is complete except for exterior parts. (4) Fabricating sifter hanger. .....More to come. Check back soon..... Back to restoration home page.