Lister 5/1 Diesel

Machine Tools

Ward Capstan Lathes - No.13C Combination Turret Lathe


The 10C and 13C had many shared features, but the 13C had a swing of 28" over the bed covers against the 23" of the 10C. Power feeds to all saddles together with feed rates for screw cutting, quick traverses were standard on all saddles including both directions for the turret saddle.

Ward No.13 Combination Capstan Lathe

Easy selection dials for speeds were standard, and the covered bed was fitted with stainless steel covers. Pumped gearbox lubrication was another feature mentioned in the factory literature.


MainMachine Menu